Advanced Instruments OsmoTECH XT User Manual

Chapter 3 Configuring settings
43
OsmoTECH XT Single-Sample Micro-Osmometer User Guide
3. Select Enabled under Synchronous Backup to
automatically perform a database backup every 5 to
55 minutes.
Each time a synchronous backup occurs, it
overwrites the existing backup file instead of creating
a new one.
4. To schedule automatic back ups, select the Enabled
checkbox and set the time of day and frequency of
the backups.
• Once a day to back up data daily.
• Once a week on and select a day to back up data
weekly.
• Once a month on and select a day of the month to
back up data monthly.
5. Select the location of the exported data.
• To save the data to a USB drive, select USB and
insert a USB drive into the instrument’s USB port.
Exported files are saved to the Advanced
Instruments>Backup folder automatically created
on the USB drive.
• To save the data to a network folder:
a. Select Network.
b. Press FOLDER.
c. If a network folder has already been configured
for another data management function such as
database import or backup, press
to
select a folder configuration to copy to the
Backup Folder screen.
Otherwise, enter the network folder settings
using the keyboards (
).
d. Press TEST to verify that the instrument can
access the folder.
NOTE: Contact your network administrator if the
instrument cannot access the folder over the
network.
e. Press SAVE and then EXIT.
6. Press SAVE to save all database backup settings.
Backing up databases manually
Press BACKUP to manually back up the databases to
the configured location (USB or network folder) as a
CSV file, complete the following steps.
If backing up to a USB drive, backup files are saved to
the Advanced Instruments>Backup folder automatically
created on the USB drive.
.

Advanced Instruments OsmoTECH XT Specifications

General

Brand	Advanced Instruments
Model	OsmoTECH XT
Category	Medical Equipment
Language	English