Chapter 2 User interface
23
OsmoTECH XT Single-Sample Micro-Osmometer User Guide
M. Login button
NOTE: The color of the Login button indicates the login status:
• Gray: No user is logged in.
• White: An Operator-level user is logged in. The username
displays next to the icon.
• Yellow: A Supervisor-level user is logged in. The username
displays next to the icon.
• Red: An Administrator-level user is logged in. The
username displays next to the icon.
To log in: Press the Login button to select your username and
log in to the system.
To log out: Press the Login button.
Understanding the status icons
On the Home screen, press
to open the LEGEND
screen which describes each status icon.
Icon categories are explained on the Testing, LAN/LIS,
Access levels, and Indicators tabs.
• Press the Testing tab for information on the following
icons that appear when testing tubes.
Item Description
Test count
Test count
Test count is low (less than 20)
• Press the LAN/LIS tab for information on the
following icons that indicate the status of an
instrument connected to a local area network (LAN)
or a Laboratory Information System (LIS).
Item Description
LIS
Gray: Disabled
Red: Enabled and disconnected
Green: Enabled and connected
LAN
Green: Connected
Gray: Disconnected
• Press the Access levels tab for information on the
following icons that indicate the access levels of
instrument users.
Item Description
Access levels
Red: Administrator
Yellow: Supervisors, administrators
White: Operators, administrators
Yellow, white: All users
To Next Page
Loading...
