91
OsmoTECH XT Single-Sample Micro-Osmometer User Guide
Appendix E
Appendix I: User Access Quick
Reference
I.1 Purpose
This document describes the functions available to OsmoTECH XT single-sample micro-osmometer users based on:
• The assigned user level (Administrator, Supervisor, and Operator)
• Access restriction configurations by authorized users (Administrators grant access to Supervisors, Supervisors may grant
access to Operators).
I.2 Definitions
Osmometer user Any Bio pharma laboratory sta member who has been trained to use an OsmoTECH XT single-sample
micro-osmometer.
Operator Osmometer user who has been trained to use this instrument with potential restrictions set by supervisors.
Supervisor Osmometer user authorized to define access restrictions to operators.
Administrator Osmometer user authorized to define access restrictions to Supervisors and Operators.
I.3 Accessible functions by user access level
Key
9
Function is always accessible to these users.
9
Function is accessible to these users depending on restrictions setting.
8
Function is never accessible to these users.
System Functions User Access Levels
Administrator Supervisor Operator
HOME screen (testing samples)
Change instrument name
9
8
8
Test samples
9
9
9
CALIBRATION screen
9
9
9
DIAGNOSTICS screen
• A/D – Test analog-to-digital converter
• CONSUMABLES – Read the test count on an consumables box that placed on top of
the instrument.
• BARCODE – Test barcode scanner
• EVENTS – Review system event data
9 9 9
• LCD (test screen)
• PRINTER (test printer if installed)
• SOLENOID (test solenoid impact)
9 9 9
• Export system event data
9
9
9
To Next Page
Loading...
