Chapter 3 Configuring settings
50
OsmoTECH XT Single-Sample Micro-Osmometer User Guide
Setting timeouts
You can set the instrument to logout after a set time of
inactivity. You can also set the screen to dim after a
specified time.
1. Press SETTINGS > RESTRICTIONS > TIMEOUTS.
2. Select an Automatic logout time and Screen
dimming time.
3. Press SAVE.
3.11 Updating the instrument (Administrators/
authorized supervisors only)
Advanced Instruments sends an update kit containing a
USB drive when a system update is needed.
Instrument updates should only be performed by
Advanced Instruments-trained service engineers.
To Next Page
Loading...
