AEMC DTR 8510 - Page 44

42 Digital Transformer Ratiometer DTR
®
Model 8510
Figure 7-3
NOTE: The installation of the drivers may take a few moments. Win-
dows may even indicate that it is not responding, however it is running.
Please wait for it to finish.
14.Whenthedriversarenishedinstalling,theInstallation Successful
dialogboxwillappear.ClickonOK.
15.
Next,theInstallation Wizard Completewindowwillappear.Clickon
Finish.
16.
A Questiondialogboxappearsnext.ClickYestoreadtheprocedure
forconnectingtheinstrumenttotheUSBportonthecomputer.
NOTE: The Set-up window remains open. You may now select another
option to download (e.g. Adobe
®
Reader), or close the window.
17. Restartyourcomputer,thenconnecttheinstrumenttotheUSBport
onthecomputer.
18.Onceconnected,theFound New Hardwaredialogboxwillappear.
Windowswillcompletethedriverinstallationprocessautomatically.
ShortcutsforDataView
®
andeachinstrumentcontrolpanelselectedduring
theinstallationprocesshavebeenaddedtoyourdesktop.
NOTE: If you connected your instrument to the computer before install-
ing the software and drivers, you may need to use the Add/Remove
Hardware utility to remove the instrument driver before repeating the
process.
www.ShopAEMC.com
Shop for AEMC products online at:
1.877.766.5412