EasyManua.ls Logo

Aerospool WT-9 Dynamic - Page 62

Default Icon
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL DESCRIPTION, OPERATING, MAINTENANCE AND REPAIR MANUAL
Inspection after Event Event description
first
25 hr
every
50 hr
every
100hr
Carried
out by:
Inspected
by:
9.6.3 Check of the lamellar carbon spring for
delaminations and attachment (lower hinge)
* * *
9.6.4 Check free movements of trimmer control
system (foreign objects)
* * *
9.7 Brake system
9.7.1 Check of the bowden from brake lever to
the main brake hydraulic face ram
* * *
9.7.2 Check of the brake lever in the parking
position. The aeroplane must be braking
check by towing of the aeroplane. Adjust
the cable if need be.
* *
9.7.3 Check hydraulic fluid condition-add or
change hydraulic fluid according to the
Maintenance Manual.
* *
9.7.4 Reinstall central pedestal cover between
pilots seats.
10. MISCELLANEOUS
EQUIPMENT
10.1 THE RESCUE SYSTEM
see manufacturer
instruction
10.1.1 Check the blocking of the rescue system
control lever
*
10.1.2 Remove rescue system cowling *
10.1.3
Check of the attachment of the rocket
engine and the control lever
*
10.1.4
Check the attachment of the parachute
*
10.1.5 Check the attachment at the firewall and at
the auxiliary girder
*
10.1.6
Check condition of parachute lines
*
10.1.7 Instal rescue system cowling *
10.2 TOW RELEASE Fixed
10.2.1 Remove tow release E85 *
10.2.2 Check tow release E85
see manufacturer
instruction
10.2.3 Instal tow release *
10.2.4 Check the tow release control lever for free
movement, tension of rope check, screw
joints, lubrication of control rod
*
10.2.5 Check the attachment of tow release in the
fuselage for delamination, screw joints
*
10.2
TOW RELEASE Winch
Pozri pokyny výrobcu
10.2.1 Check condition of entire rope *
10.2.2 Check end knot, red line is visible *
10.2.3 Check the knot condition at guillotine *
10.2.4 Check the winch shaft for foreign matters *
10.2.5 Check the leading on guillotine and on
guillotine actuating lever in cabin
*
10.2.6 Functional test winch and automatic shut
off
*
Date: 07.02.2007 Rev. 1 WT-9 Dynamic Section 3 Page 3 11

Table of Contents

Other manuals for Aerospool WT-9 Dynamic

Related product manuals