1260 Infinity II Analytical-Scale & Bio-inert Fraction Collector User Manual 201
Appendix
11
General Safety Information
Before Applying Power
Ground the Instrument
Wrong voltage range, frequency or cabling
Personal injury or damage to the instrument
➔ Verify that the voltage range and frequency of your power distribution matches to
the power specification of the individual instrument.
➔ Never use cables other than the ones supplied by Agilent Technologies to ensure
proper functionality and compliance with safety or EMC regulations.
➔ Make all connections to the unit before applying power.
Note the instrument's external markings described under “Safety Symbols” on page 204.
Missing electrical ground
Electrical shock
➔ If your product is provided with a grounding type power plug, the instrument
chassis and cover must be connected to an electrical ground to minimize shock
hazard.
➔ The ground pin must be firmly connected to an electrical ground (safety ground)
terminal at the power outlet. Any interruption of the protective (grounding)
conductor or disconnection of the protective earth terminal will cause a potential
shock hazard that could result in personal injury.
To Next Page
Loading...
Need help?
General
