8-36 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
If You Have A Problem
If Errors Occur
368 NFS Software caused connection abort.
Network file system (NFS) was disconnected. Verify the NFS server is
operating correctly.
369 Connection reset by peer. Remote disconnected.
Remote connection was terminated. Verify the remote setup and the
executed operation are correct. Verify the local and remote systems are
operating properly.
370 Unable to transfer data. Communication down.
Data cannot be transferred because the communication was shutdown.
371 NFS Connection refused.
Connection to NFS was refused. Verify the refused device was properly
exported.
372 Connection failed. Socket was not sent.
NFS Connection failed because the socket was not sent.
373 Too many levels of symbolic links.
The file is linked to itself, or the linked file is linked back to the file.
375 Cross-device link.
Unable to hard link different physical file systems. Hard link must be
done to same file system.
377 Unable to use this protocol.
Unable to use this protocol on the network.
378 This protocol is not supported.
This protocol is not supported on the network.
381 This type of protocol is not supported.
This type of protocol is not supported on the network.
383 NFS too many references, can't splice.
386 System busy. Saving/getting text files.
The 4155B/4156B cannot be interrupted by other operations. For
example, text files cannot be saved or retrieved while making
measurements.
To Next Page
Loading...
Need help?
General
