Agilent 4155B/4156B User’s Guide Vol.2, Edition 5 8-37
If You Have A Problem
If Errors Occur
387 Unable to access file. The file is locked.
Unable to write to this file. The file is locked by another
process.
388 No such device or address.
The 4155B/4156B cannot find the specified network device or
address. Verify the correct device file exists, the select
code/major number/minor number are correct, and that the
device is correctly connected (high speed or low speed port).
389 System busy. File operation is in progress.
File operation is in progress. During a file operation, the
4155B/4156B cannot perform other operations, such as making
measurements, changing setup fields, printing and so forth.
391 Network printer connection time out.
A time out occurred when connecting the network printer to the
print server or NFS server.
392 Network File System server is down.
Server for the Network File System is down. Contact your
network system administrator.
393 Communication to desired server failed.
Communication to desired server failed.
394 System busy. Mounting device.
When mounting a device, the 4155B/4156B cannot be
interrupted by another operation, such as making a
measurement.
400 System bug. Undefined method.
401 System bug. Invalid parameter.
402 System bug. Inconsistency.
410 Unable to display. Number must be <10001.
Unable to display the measurement results because the data size
of the result is too large. The number of the measurement
results must be less than 10001.
411 Connection failed. Set Destination
address.
Network connection to destination failed. Verify the destination
address is set correctly.
412 Address family not supported.
Specified address family is not supported for the currently used
socket.
To Next Page
Loading...
Need help?
General
