Agilent Technologies 54830 Series User Manual

Using the Oscilloscope
To install the printer software
3-64
17 If you are using a serial printer, set the baud rate, data bits, parity,
stop bits, and handshake to match the settings for your printer.
If you are using a parallel printer, ensure that the checkbox for
“Spool MS-DOS print jobs” is cleared, and that “Check port state
before printing” is checked.
These dialogs that appear show example settings:
Figure 3-49
Port Configuration Dialogs
18 Click OK to return to the printer port selection dialog box. Then click
Next.

Agilent Technologies 54830 Series Specifications

General

Brand	Agilent Technologies
Model	54830 Series
Category	Test Equipment
Language	English