Agilent Technologies 54830 Series User Manual

Using the Oscilloscope
To clear the waveform display
3-9
To clear the waveform display
• Press the Clear Display key.
The oscilloscope clears the waveform display. If the oscilloscope is in Run mode
and is receiving triggers, it will update the display as it collects new waveform
data. Clearing the waveform display also resets averaging, infinite persistence,
and color grade persistence, histogram, and mask testing database.
Figure 3-3
Clear Display Key
Erases the current
waveform display

Agilent Technologies 54830 Series Specifications

General

Brand	Agilent Technologies
Model	54830 Series
Category	Test Equipment
Language	English