Chapter 4: Calibration
To check the flat panel display (FPD)
4–6
6
Select a color by clicking the radio button for that color.
7 Carefully check the colored region for pixels colored differently than the current
selection.
These pixels are either inactive or stuck. If black (when a color or white is selected), they are
inactive; if another color than the current selection, but not black, then they are stuck. If the
display does not meet the specification given on the previous page, replace it. See chapter 5 for
removal and replacement procedures.
8
Repeat steps 6 and 7 for all colors.
To Next Page
Loading...
