148 5975 Series MSD Operation Manual for MassHunter
5 General Maintenance
6 Place the parts in a clean beaker. Loosely cover the beaker with clean
aluminum foil (dull side down).
7 Dry the cleaned parts in an oven at 100 °C for 5–6 minutes.
WARNING
Let the parts cool before you handle them.
NOTE
Take care to avoid recontaminating cleaned and dried parts. Put on new, clean gloves
before handling the parts. Do not set the cleaned parts on a dirty surface. Set them only
on clean, lint-free cloths.
To Next Page
Loading...
