Introduction 1
5975 Series MSD Operation Manual for MassHunter 29
Cleaning/Recycling the Product
To clean the unit, disconnect the power and wipe down with a damp, lint-free
cloth. For recycling, contact your local Agilent sales office.
Liquid Spillage
Do not spill liquids on the MSD.
Moving or Storing the MSD
The best way to keep your MSD functioning properly is to keep it pumped
down and hot, with carrier gas flow. If you plan to move or store your MSD, a
few additional precautions are required. The MSD must remain upright at all
times; this requires special caution when moving. The MSD should not be left
vented to atmosphere for long periods.
To Next Page
Loading...
Need help?
General
