Agilent 6400 Series Triple Quad LC/MS System Installation Guide 3
In This Guide…
This guide contains information to install the Agilent 6400
Series Triple Quadrupole LC/MS System.
1 Instrument Installation
This chapter describes the steps that are needed to install
the Triple Quadrupole LC/MS.
2 Software Installation and Configuration
This chapter describes the steps that are needed to install
the MassHunter software.
3 Installation Completion and System Verification
In this chapter, you finish the hardware setup.
4 Installation and Verification of Other Sources
This chapter contains the steps needed to install and verify
the operation of the APCI, APPI, and MultiMode sources.
5 Other Setup Tasks
This chapter contains tasks that are related to setting up
your Triple Quadrupole LC/MS instrument.
6 Reference
This chapter contains parameters for verifying performance.
To Next Page
Loading...
