5 Other Setup Tasks
To remove the MassHunter Workstation software
88 Agilent 6400 Series Triple Quad LC/MS System Installation Guide
To remove the MassHunter Workstation software
1 If you have any data, methods, libraries, or other files or directories that
you want to save, and then move or copy them to a folder outside of those to
be deleted.
2 Close all MassHunter Workstation programs, including the Data
Acquisition, Qualitative Analysis and Quantitative Analysis programs.
3 Click Start > Control Panel > Programs and Features.
4 Remove these programs:
• Agilent MassHunter Workstation Data Acquisition
• Agilent MassHunter Workstation Qualitative Analysis
• Agilent MassHunter Workstation Quantitative Analysis
• Agilent MassHunter Workstation Quantitative Analysis Reporting
5 Close all applications.
6 Reboot the computer. You are now ready to install new software.
To Next Page
Loading...
