Agilent Technologies 6490 Installation Guide

1 Instrument Installation
Step 2. Prepare to install the system
10 Agilent 6400 Series Triple Quad LC/MS System Installation Guide
Step 2. Prepare to install the system
Before you begin, check that you have these parts:
• Utility knife and needle nose pliers
1 Unpack and set up the Triple Quadrupole LC/MS.
a Cut the tie wraps around the package. See Figure 4.
Figure 4 Triple Quadrupole LC/MS shipping container
b Lift the boxes off the top of the instrument. See Figure 5.

Agilent Technologies 6490 Specifications

General

Brand	Agilent Technologies
Model	6490
Category	Laboratory Equipment
Language	English