To Next Page

To Previous Page

Agilent 6400 Series Triple Quadrupole LC/MS System

Installation Guide

Instrument Installation

Step 1. Unpack and set up the Triple Quadrupole LC/MS 9

Step 2. Prepare to install the system 10

Step 3. Set up the Agilent MS40+ pumps 14

Step 4. Connect the Triple Quadrupole LC/MS 18

Step 5. Install the spray chamber 27

Step 6. Install the Agilent LC system 34

This chapter describes the steps that are needed to install the Triple

Quadrupole LC/MS.

Agilent Technologies 6490 Installation Guide

Other manuals for Agilent Technologies 6490