6 Agilent 6400 Series Triple Quad LC/MS System Installation Guide
Contents
4 Installation and Verification of Other Sources 73
G1947B APCI Source 74
To install the G1947B APCI source 74
To verify the operation of the G1947B APCI source 75
G1978B Multimode Source 76
To install the G1978B multimode source 76
To verify the operation of the G1978B multimode source 78
G1971B APPI Source 79
To install the G1971B APPI source 79
To verify the operation of the G1971B APPI source 81
5 Other Setup Tasks 83
To start the Data Acquisition program 84
To stop MassHunter Engines 84
To stop MassHunter processes in case of unrecoverable errors 85
To view the log book 85
To configure log book notification 86
To configure the network interface card 87
To remove the MassHunter Workstation software 88
To reconfigure the instrument 89
To confirm the collision cell gas flow rate (6470A and 6495A/B only) 91
6 Reference 105
Positive Ion Mode Checkout Conditions 106
Negative Ion Mode Checkout Conditions 109
To Next Page
Loading...
Need help?
General
