Agilent Technologies 6490 Installation Guide

49
Agilent 6400 Series Triple Quadrupole LC/MS System
Installation Guide
3
Installation Completion and System
Verification
Step 1. Condition the Agilent LC instrument 50
Step 2. Reset the collision cell gas flow rate 54
Step 3. Prepare the performance evaluation samples 58
Step 4. Set up methods and worklists 60
Step 5. Verify the Triple Quadrupole LC/MS sensitivity 63
This chapter contains the steps needed to complete the hardware setup and
verify the performance specifications of the installed system.

Agilent Technologies 6490 Specifications

General

Brand	Agilent Technologies
Model	6490
Category	Laboratory Equipment
Language	English