Hardware Symptoms 2
Troubleshooting 13
Vial Mishandled by ALS
Refer to the 7683B Automatic Liquid Sampler Installation,
Operation and Maintenance manual for additional information.
When you find a mishandled sample vial, do the following:
• Check for folds or wrinkles in the crimp cap, especially near
the neck of the sample vial.
• Use Agilent recommended sample vials.
• Check sample labels (if applicable).
• Check that they are the correct size.
• Verify that the labels do not interfere with the gripper.
• Check that the tray quadrants are clean and snapped into the
tray base.
To Next Page
Loading...
