Agilent Technologies 708-DS User Manual

108 708-DS / 709-DS Operator’s Manual
4 Operating the 708-DS / 709-DS
Lower Drive Unit Notification
Displays on systems with manual drive units. It indicates that the drive
unit must be fully lowered before any testing may proceed (“Manual
Drive Unit Up / Down” on page 60). Press Ok to retest for the fully
lowered position. If the drive unit is not fully lowered, the apparatus
beeps and the warning remains on screen. Once the drive unit is in the
fully lowered position, press Ok to continue the run. Press Cancel to
abort the current run.
Raise Drive Unit Notification
Displays on systems with manual drive units (“Manual Drive Unit Up /
Down” on page 60). It indicates when it is permissible to raise the drive
unit. Press Ok to continue a run. Press Cancel to abort the current run.
Table 1 6 Warning Screens (Yellow)

Agilent Technologies 708-DS Specifications

General

Brand	Agilent Technologies
Model	708-DS
Category	Laboratory Equipment
Language	English