Agilent Technologies 708-DS User Manual

26 708-DS / 709-DS Operator’s Manual
3 Setting Up the 708-DS / 709-DS
1 Remove the black caps from the five (5) screws located on the front,
side, and rear of the base plate of the dissolution apparatus.
Figure 5 Level-Adjustment Screw Caps
2 Raise the side stability feet located toward the back on either side of
the base plate so they are not touching the laboratory bench.

Agilent Technologies 708-DS Specifications

General

Brand	Agilent Technologies
Model	708-DS
Category	Laboratory Equipment
Language	English