56 708-DS / 709-DS Operator’s Manual
4 Operating the 708-DS / 709-DS
• The bath temperature is maintained at the set temperature. If the
bath is not at the set temperature when the test is started, the bath
temperature is displayed in red while it heats or cools. A Bath
Temperature Error (“Bath Temperature Error” on page 110)
displays if the temperature is out of tolerance.
• The displayed system date and time are updated once per second.
• The measured rotational spindle speed and bath / vessel
temperature(s) are displayed at an update rate of once per second.
• Run is relabeled Stop.
• If a printer is installed, test data is periodically printed based on
the Profile Print Interval.
• The test stops when the elapsed time equals the Test Duration.
Upon completion, a message is printed (if installed and enabled). The
display reverts to the Main screen with the Run button enabled.
To Next Page
Loading...
Need help?
General
