Operating the 708-DS / 709-DS 4
708-DS / 709-DS Operator’s Manual 89
Menu Screen - Calibration Screen 2
Calibration and Preventative Maintenance due dates may be entered on
the Regulatory Calibration Date screen. A reminder displays over the
Main screen to indicate that calibration or maintenance is required. You
must develop your own Calibration and Preventative Maintenance
schedules.
From the Regulatory Calibration Date screen:
• Press Cancel to exit the routine without saving the values and
return to the Menu screen.
• Press Back to save all values to permanent memory and return to
the previous Calibration screen.
• Press Finish to save all values to permanent memory and return to
the Menu screen.
To Next Page
Loading...
