Agilent Technologies 7683 - Labeling Sample Vials; Sample Vial Septa

Installation Guide
Configuring Your GC (6890)
12
Configuring Your GC (6890)
When installation is complete, configure your 6890 GC for use with the 7683
Automatic Liquid Sampler.
Refer to the section on injector configuration in your GC Operating Manual for
instructions to set the following:
• Front and/or back injector location
• Nanoliter enable
• Tray enable
• Bar code reader position (position 3, enable, and type)
• Solvent B bottle usage (vial B only, or alternate between vials B and B2)