Agilent Technologies 7820A Advanced User's Guide

Detectors 5
Advanced User Guide 107
On ignition, the signal increases. Typical levels are 4 to 40 pA
in sulfur mode, 10 to 70 pA in phosphorus mode. Verify that
the flame is lit by holding a cold, shiny surface, such as a
mirror or chrome-plated wrench, over the vent exit. Steady
condensation indicates that the flame is lit.

Agilent Technologies 7820A Specifications

General

Brand	Agilent Technologies
Model	7820A
Category	Laboratory Equipment
Language	English