52 Advanced User Guide
4 Columns and Oven
Setting the oven parameters for ramped temperature
Single ramp
1 Press [Oven] to open the oven parameter list.
2 Enter a starting temperature (Temperature).
3 Enter the time (Initial time) that you want the oven to stay at
Temperature.
4 Enter the rate (Rate 1) at which the oven temperature is to
change.
5 Enter the final temperature (Final temperature 1).
6 Enter the time (Final time 1) the oven is to hold Final
temperature 1.
7 To end the oven ramp program after Ramp 1, set Rate 2 to
zero.
Multiple ramps
In a multiple-ramp program, Final time for one ramp is also Initial
time for the next ramp. Thus, there is only one Initial time.
1 Set up the first oven ramp as described in “Single ramp”.
2 Enter the rate (Rate 2) at which you want the oven
temperature to increase for the second oven ramp.
3 Enter the final temperature (Final temperature 2).
4 Enter the number of minutes (Final time 2) that you want the
oven to hold the final temperature.
5 To end the temperature program after the second ramp, set
Rate 3 to zero.
6 To add additional oven ramps, repeat the steps described.
To Next Page
Loading...
Need help?
General
