43
3
3Using the Agilent 81101A
This chapter provides complete reference information for using the
Agilent 81101A by means of the user interface screens.
Each screen is described in detail. To access the individual screens, use
the softkeys below the screen. There are two softkey layouts:
the default layout
the alternative layout displayed after pressing the MORE key
At the end of this chapter, Warnings and Errors on page 72 provides
details on the instruments warning and error messaging system.
NOTE
For general information on using the Agilent 81101A and information on
the instruments hardkeys, please refer to Chapter 1 Introducing the
Agilent 81101A Pulse Generator on page 15.
NOTE
For information on using the Agilent 81101A via remote control, please
refer to the Reference Guide, part number 81101-91021.
OUTPUT TRG-LEVLIMITSMODE/TRG
TRG-LEV CONFIGMEMCARDMODE/TRG
To Next Page
Loading...
Need help?
General
