Agilent InfinityLab LC Series Vialsamplers User Manual 350
12 LAN Configuration
PC and Agilent ChemStation Setup
8 If required, change under Configure – Path the folder locations.
9 Save the current configuration via File – Save.
10 Exit the Configuration Editor.
11 Start the Agilent ChemStation.
During first startup or when the system configuration has changed, a
notification shows up.
12 The left column shows the modules that could be configured. You may select
the module manually from the list. We use the Auto Configuration mode. Click
on Yes.
To Next Page
Loading...
Need help?
General
