Agilent InfinityLab LC Series Vialsamplers User Manual 74
3Using the Module
Install the Optional Integrated Column Compartment
Install the Optional Integrated Column
Compartment
Unpacking the Unit
Damaged Packaging
Damaged Packaging
If the delivery packaging shows signs of external damage, please call your Agilent
Technologies sales and service office immediately. Inform your service
representative that the instrument may have been damaged during shipment.
Condensation
"Defective on arrival" problems
If there are signs of damage, please do not attempt to install the module.
Inspection by Agilent is required to evaluate if the instrument is in good
condition or damaged.
Notify your Agilent sales and service office about the damage.
An Agilent service representative will inspect the instrument at your site and
initiate appropriate actions.
Condensation within the module
Condensation can damage the system electronics.
Do not store, ship or use your module under conditions where temperature
fluctuations could cause condensation within the module.
If your module was shipped in cold weather, leave it in its box and allow it to
warm slowly to room temperature to avoid condensation.
To Next Page
Loading...
Need help?
General
