Agilent InfinityLab LC Series Vialsamplers User Manual 48
2 Site Requirements and Specifications
Specifications of the Sample Cooler
General hazards and improper disposal
Improper disposal of the media and components used pollutes the
environment.
The disposal or scrapping of the Sample Cooler or the Sample Thermostat
must be carried out by a qualified disposal company.
All media must be disposed of in accordance with national and local
regulations.
Please contact your local Agilent Service Center in regard to safe
environmental disposal of the appliance or check www.agilent.com for
more info.
Table 6 Performance Specifications of the Sample Cooler
Type Specifications
Operating principle High performance, low-energy consumption
micro-compressor based cooler with
ozone-friendly HFC-134a coolant (42 g),
user-upgradable.
Temperature range from 4 °C to 5 °C below ambient
Temperature settable from 4 – 40 °C in 1 ° increments
Temperature accuracy (<25 °C, <50 % r.H.) 2 °C to 6 °C at a setpoint of 4 °C
The Agilent Infinity II Sample Cooler is not available for trade sales anymore and
has been replaced by the Agilent InfinityLab Sample Thermostat.
To Next Page
Loading...
Need help?
General
