5977B Series MSD Operating Manual 101
5 Operating in EI Mode
Operating the MSD from the DS 103
Operating the MSD from the 7890 GC Control Panel 104
Configuring the MSD through the Web User Interface (WUI) 108
eModule Mini Display Readout 111
Front Panel Instrument Status LED 112
Before You Turn On the MSD 113
Pumping Down 114
Controlling Temperatures 114
Controlling Column Flow 115
Venting the MSD 116
To View MSD Temperature and Vacuum in Manual Tune 117
To Set Monitors for MSD Temperature and Vacuum Status 119
To Set Analyzer Temperatures from the Instrument Control View 122
To Set the GC/MSD Interface Temperature from MassHunter 124
To Monitor High Vacuum Pressure 125
To Tune the MSD in EI Mode 127
To Set the Operation Mode for the Optional JetClean System 129
To Set the JetClean Parameters for the Clean Only Mode 130
To Verify EI System Performance 131
To Perform High-Mass Testing 132
To Open the MSD Covers 135
To Vent the MSD 136
To Pumpdown the MSD 139
To Next Page
Loading...
Need help?
General
