Agilent Technologies MSD 5977B Series

5977B Series MSD Operating Manual 77
4 Installing 7890 GC Columns
Columns 78
To Install a Capillary Column in a Split/Splitless Inlet 80
To Condition a Capillary Column 83
To Install a Capillary Column in the GC/MSD Interface Using the Self-Tightening
Column Nut 84
To Install a Capillary Column in the GC/MSD Interface Using a Standard Column
Nut 89
To Install the GC/MSD Interface Tip Seal 93
To Calibrate Column Flow Linear Velocity in a 7890 GC 95
The GC/MSD Interface for a 7890B Series GC 98
Before you can operate your GC/MSD system, you must select, install, and
condition a GC column. This chapter shows you how to install and condition a
column. For correct column and flow selection, you must know what type of
vacuum system your MSD has.