1Introduction
Electromagnetic compatibility
30 5977B Series MSD Operating Manual
Electromagnetic compatibility
This device complies with the requirements of CISPR 11. Operation is subject to
the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference
that may cause undesired operation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment on and off, the user
is encouraged to try one or more of the following measures:
1 Relocate the radio or antenna.
2 Move the device away from the radio or television.
3 Plug the device into a different electrical outlet, so that the device and the
radio or television are on separate electrical circuits.
4 Ensure that all peripheral devices are also certified.
5 Ensure that appropriate cables are used to connect the device to peripheral
equipment.
6 Consult your equipment dealer, Agilent Technologies, or an experienced
technician for assistance.
Changes or modifications not expressly approved by Agilent Technologies could
void the user’s authority to operate the equipment.
Sound emission declaration
Sound pressure
Sound pressure Lp <70 dB according to EN 27779:1991.
Sound pressure Lp <70 dB according to EN ISO 3744:1995
Indicates electrostatic discharge hazard.
Indicates that you must not discard this
electrical/electronic product in domestic household
waste.
To Next Page
Loading...
Need help?
General
