To Next PageTo Next PageWhat to do if Agria Lawn Mower clutch slips?
If the clutch slips on your Agria Lawn Mower: * The clutch hand lever may be misadjusted; adjust the clutch free play. * The clutch may be worn out; exchange the clutch disc.
Why Agria 5400 engine does not start?
There are several reasons why the Agria Lawn Mower engine might not start: * The spark plug connector may not be connected; ensure it is properly connected. * The choke may not be in the “CHOKE” position; set the choke lever to this position. * The engine-off switch may be set to “0”; set it to “I”. * The safety circuit may not be in the start position; ensure it is correctly set. * The fuel tank may be empty or contain poor fuel; refill with fresh fuel. * The fuel line could be clogged; clean the fuel line. * The spark plug may be defective; clean, adjust, or replace it. * The engine may have too much fuel; dry and adjust the spark plug, then start at full throttle. * The engine-off line may be defective; check the line and connections. * Air may be leaking in due to ...
Diagrams identifying parts of the Robin EH 25 4-stroke engine.
Diagrams identifying parts of the Rotax 232 2-stroke engine.
General warning symbol and its meaning regarding safety.
Defines the intended use of the mower and manufacturer's liability.
Guidelines for safe operation, maintenance, and accident prevention.
Safety precautions related to the operating environment and bystanders.
Manufacturer, type, dimensions, output, ignition, oil, fuel, carburetor, and noise specs.
Manufacturer, type, dimensions, output, ignition, oil, fuel, carburetor, and noise specs.
Specifications and components of the planetary mowing drive.
Instructions for mounting cutter bars and exchanging mowing knives.
Specifications and assembly procedures for the rocker arm attachment.
Important notes on engine break-in, fuel, and initial setup.
Pre-operation checks for fuel, oil, and transmission grease levels.
Step-by-step guide for starting the 4-stroke engine.
Step-by-step guide for starting the 2-stroke engine.
Procedure for safely shutting down the petrol engine.
Detailed steps for operating the mower during mowing.
Procedure for restarting the engine if it stops during operation on slopes.
Procedures for checking and changing engine oil.
Maintenance tasks specific to the 2-stroke engine.
Maintenance procedures for the gearbox and drive-wheels.
Lubrication procedures for the planetary mowing drive.
Bolt tightness checks and lubrication for the rocker arm drive.
Maintenance tasks for various cutter bar types.
Knife removal, attachment, and guide setting for Universal-SC cutter bar.
Knife removal, attachment, and adjustment for finger cutter bar.
Knife removal, attachment, lubrication, and guide adjustment.
Instructions and recommendations for re-grinding mowing knives.
Troubleshooting steps for when the engine fails to start.
Diagnosing and resolving engine misfirings.
Addressing overheating issues in the engine.
Troubleshooting engine misfires at higher speeds.
Resolving issues where the engine stalls during idle.
Diagnosing why the petrol engine is not running smoothly.
Troubleshooting when the engine fails to stop.
Diagnosing low power output from the petrol engine.
Resolving issues where the clutch fails to disengage.
Troubleshooting a slipping clutch.
Addressing excessive vibration during operation.
Diagnosing sudden drops in mowing output.
Clearing plant trash caught between the mower knives.
Correcting interference between top and bottom knife blades.
Aligning mower blades correctly.
General| Brand | Agria |
|---|---|
| Model | 5400 |
| Category | Lawn Mower |
| Language | English |
