AhnLab TrusGuard - Page 50

3
50 AhnLab TrusGuard Installation Guide
 SSL: License to use SSL VPN
 Anti-Virus: License to use anti-virus
 Anti-Spam: License to use anti-spam
 Anti-Malsite: License to use anti-malsite
 IPv6: License to use IPv6 firewall
The following information is needed to create the license.
 Device ID: Device number
 Serial Number: Product license number
 Registration Date: License registered date.
Step 2: Enter License
1 In the New License field, enter the encoded license string.
2 Click OK.
3 Click Logout to log out, and log in again.
Note
You need the Device ID and Serial Number to change the license.
Only authorized engineers can register/change the license. To change the license, you need to
contact AhnLab or your vendor.