Need help?Do you have a question about the AhnLab TrusGuard and is the answer not in the manual?
Contacting AhnLab's support center for assistance and troubleshooting.
Explains the guide's purpose, audience, and document conventions.
Items to check before using the product, including authenticity and package contents.
Important safety guidelines regarding power, cables, and environmental factors.
Requirements for the installation site, covering temperature, ventilation, humidity, and pollution.
Security requirements to ensure before installing the device, covering physical and policy aspects.
Overview of AhnLab TrusGuard as an integrated network security solution and its A-TEAM architecture.
Details on different TrusGuard models for various enterprise sizes and their specifications.
Information on other AhnLab products compatible with TrusGuard and their version requirements.
General information on who installs TrusGuard, managing installed devices, and installation steps.
Pre-installation checks for network, location, router/switch, and IP address bandwidth.
Default system settings and checks required before configuring the system.
Steps for connecting the device, logging in via web browser, and changing account information.
Procedures for preparing, entering, and managing TrusGuard licenses.
Steps to check network connection and update system signatures and behaviors via the Internet.
Configuration of network interfaces, including types like Bridge, Aggregation, VLAN, and Secondary Port.
Method for configuring a network port by manually entering the IP address.
Configuration for connecting to the Internet using PPPoE with no static IP address.
Setting up network interfaces to obtain IP addresses from a DHCP or DHCPv6 server.
Setting up load balancing or mesh in a network for high-availability using aggregation interfaces.
Using bridge interface when network settings cannot be changed or for specific network configurations.
Setting up VLAN interfaces for routing between different VLANs within the system.
Configuring secondary ports for HA mode, especially for services using TrusGuard's IP address.
Configuring High Availability modes (Active-Standby, Active-Active) for TrusGuard devices.
Setting up routing methods like static, OSPF, RIP, BGP, and PIM-SM for system use.
Configuring security policies, including changing default accounts and restricting access by IP address.
Restricting access to the administrator web page by specifying allowed IP addresses.
Registering and setting up servers to manage system logs, including log levels and types.
Configuring settings for the local server to manage system logs.
Setting up TrusAnalyzer on a device with a hard disk to manage local logs.
Connecting to a remote log server for log management, especially for performance and stability.
Changing host name, time, and system language for device identification and operation.
Adjusting session timeout, TCP MSS, and validation test settings for specific network environments.
Defining security policies based on targets like packets, sessions, and payload.
Instructions for rack-mounting the TrusGuard device and connecting it to power and network.
Monitoring and checking policies after installation to ensure proper operation.
Final checks for system operation and receipt verification after installation.
Instructions for installing, using, and removing the TrusGuard SSL VPN Client.
Details on logging in using ID/Password or digital certificates.
Procedures for registering, exporting, changing passwords, and deleting certificates for SSL VPN.
Information on using TrusGuard Auth for proxy and user authentication.
Covers logging in with OTP, after logout, and for other applications.
Steps for safely terminating the system and removing the device from the network.
To Next Page
General