3
Chapter3 Installation 57
▪ SSH: To allow connection to SSH terminal
• MTU (100 to 1,500 bytes, Default: 1,500)
▪ 100 to 1,360 bytes, when using IPSec VPN
▪ PPPoE: 100 to 1,492 bytes (Default: 1,492)
▪ IPv6 Network: 1,280 to 1,500 bytes
• Duplex: Set the transmission rate and method (10Mbps Half, 10Mbps Full, 100Mbps Half,
100Mbps Full, 1000Mbps Full, 10Gbps Full, Auto-configuration).
3 Click OK.
4 Click Apply.
Note
If you do not want to use an IPv6 address, enter ::/0.
To Next Page
Loading...