Version 1.21 193
s5000
/
s6000
FX
EQ
Pressing EQ in the main MULTIFX page will show this screen:
The EQ section of the two multi-effects channels is a four band EQ offering lowpass control over a
low frequency, two bandpass mid frequencies and a highpass high frequency control. I.e.:
LP
BP1
BP2
HP
GAIN
GAIN
GAIN
GAIN
You may set the centre frequency and the gain for each of the four channels (on the two mid
frequency ranges, you may also set the width of the EQ effect).
FREQUENCY
G
A
I
N
LOW BP1 BP2 HI
To Next Page
Loading...
