74 Version 1.21
MULTI
s5000
/
s6000
NOTE REGARDING QUICKLOAD:
It is possible to use QUICK LOAD even if you have not created a multi first. In the blank multi
page, select the part you wish to QUICKLOAD into. Now press PART TOOLS followed by
QUICKLOAD. Select the sound you want to load and press LOAD INTO PART. Because you
have not yet created the multi, you will receive this prompt first:
Pressing CREATE NEW will pop-up the name prompt:
You should create the multi after which you can proceed with QUICKLOAD as described.
To Next Page
Loading...
