Alcatel-Lucent 7210 SAS M - Page 126

Command Reference
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide Page 121
— max-auth-req max-auth-request
— port-control {auto | force-auth | force-unauth}
— quiet-period seconds
—[no] radius-plcy name
— re-auth-period seconds
— [no] re-authentication
— server-timeout seconds
—no server-timeout
— supplicant-timeout seconds
—no supplicant-timeout
— transmit-period seconds
—no transmit-period
—[no] tunneling
Port Ethernet Down-when-Looped Commands
config
— [no] port {port-id}
— ethernet
— down-on-internal-error
—no down-on-internal-error
— down-when-looped
— keep-alive timer
—no keep-alive
— retry-timeout timer
—no retry-timeout
— [no] shutdown
Port Ethernet EFM OAM Commands
config
— [no] port {port-id}
— ethernet
— efm-oam
— [no] accept-remote-loopback
— mode {active | passive}
— [no] shutdown
—[no] transmit-interval interval [multiplier multiplier]
— [no] tunneling
Port Ethernet LLDP Commands
config
— [no] port {port-id}
— ethernet
— lldp
—[no] tunnel-nearest-bridge-dest-mac