Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide Page 257
Collect Stats
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file.
OTU
OTU encapsulation status.
Configured
Address
The base chassis Ethernet MAC address.
Hardware Address The interface's hardware or system assigned MAC address at its
protocol sub-layer.
Transceiver Type Type of the transceiver.
Model Number The model number of the transceiver.
Transceiver Code The code for the transmission media.
Laser Wavelength The light wavelength transmitted by the transceiver's laser.
Connector Code The vendor organizationally unique identifier field (OUI)
contains the IEEE company identifier for the vendor.
Diag Capable Indicates if the transceiver is capable of doing diagnostics.
Vendor OUI The vendor-specific identifier field (OUI) contains the IEEE company
identifier for the vendor.
Manufacture date The manufacturing date of the hardware component in the mmddyyyy
ASCII format.
Media The media supported for the SFP.
Serial Number The vendor serial number of the hardware component.
Part Number The vendor part number contains ASCII characters, defining the ven-
dor part number or product name.
Input/Output When the collection of accounting and statistical data is enabled, then
octet, packet, and error statistics are displayed.
Description A text description of the port.
Interface
The port ID displayed in the slot/mda/port format.
Speed
The speed of the interface
Link-level
Ethernet — The port is configured as Ethernet.
Label Description (Continued)
To Next Page
Loading...
Need help?
General
