Alcatel-Lucent 7750 - Page 290

Interfaces
Page 290 7750 SR Interface Configuration Guide
DS3 Commands
— [no] ds3 [sonet-sdh-index]
— atm
— cell-format cell-format
— mapping mapping
— min-vp-vpi value
— bert {2e3 | 2e9 | 2e11 | 2e15 | 2e20 | 2e20q | 2e23 | ones | zeros | alter-
nating} duration duration
—no bert
— bit-error-insertion rate
—no bit-error-insertion
— channelized {ds1 | e1}
—no channelized
— cisco-hdlc
— down-count down-count
—no down-count
— keepalive time-interval
—no keepalive
— up-count up-count
—no up-count
— clock-source {loop-timed | node-timed}
— crc {16 |
32}
— description description-string
—no description
— [no] egress-scheduler-override
— level priority-level rate pir-rate [cir cir-rate]
—no level priority-level
— max-rate rate
—no max-rate
— egress-scheduler-policy port-scheduler-policy-name
— no egress-scheduler-policy
— encap-type {atm | bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-relay
| wan-mirror | cisco-hdlc | cem}
— [no] feac-loop-respond
— frame-relay
— [no] frf-12
— egress
— qos-profile profile-id
—no qos-profile
— fragment-threshold threshold
—no fragment-threshold
— lmi-type {ansi | itu | none | rev1
}
— mode {dce | dte | bidir}
— n391dte intervals
—no n391dte
— n392dce threshold
—no n392dce
— n392dte threshold
—no n392dte
— n393dce count
—no n393dce
— n393dte count
—no n393dte
— t391dte keepalive