Alcatel-Lucent 7750 - Page 289

Command Reference
7750 SR Interface Configuration Guide Page 289
— t391dte keepalive
—no t391dte
— t392dce keepalive
—no t392dce
— idle-cycle-flag {flags | ones}
—no idle-cycle-flag
— idle-payload-fill {all-ones}
— idle-payload-fill pattern pattern
—no idle-payload-fill
— idle-signal-fill {all-ones}
— idle-signal-fill pattern pattern
—no idle-signal-fill
— load-balancing-algorithm option
—no load-balancing-algorithm
— mac ieee-address
—no mac
— [no] mode {access | network}
— mtu mtu-bytes
—no mtu
— network
— accounting-policy policy-id
—no accounting-policy
— [no] collect-stats
— queue-policy name
—no queue-policy
— ppp
— [no] ber-sf-link-down
— compress {acfc [pfc] | pfc [acfc]}
—no compress
— keepalive time-period [dropcount drop count]
—no keepalive
— [no] scramble
— [no] shutdown
— speed {56 | 64}
— timeslots timeslots
—no timeslots
— clock-source {loop-timed | node-timed | adaptive | differential}
— framing (DS-1) {esf | sf | ds1-unframed}
— insert-single-bit-error
— [no] invert-data
— loopback {line | internal | fdl-ansi | fdl-bellcore | payload-ansi |
inband-ansi | inband-bellcore}
—no loopback
— [no]
remote-loop-respond
— [no] report-alarm [ais] [los] [oof] [rai] [looped]
— [no] shutdown
— signal-mode {cas}
—no signal-mode
— threshold {ber-sd | ber-sf} rate {1 | 5 | 10 | 50 | 100}
—no threshold {ber-sd | ber-sf}
— hold-time hold-time {[up hold-time up] [down hold-time down]}
—no hold-time
— lbo [0dB | -7.5dB | -15.0dB | -22.5dB]
— length {133 | 266 | 399 | 533
| 655}