Alcatel-Lucent OmniTouch 8082 My IC - Page 60

60
 The port used by PC for synchronization : if
default port cannot be used on the PC you
can change it.
If you modify the port used by the
application, you have to do the same
modification on the phone side.
Secured connection : while communicating
between My IC Phone Synchronizer and the
device, both unsecured HTTP or secured
HTTPS protocols can be used. If you checked
the “Use secured connection“ Ý checkbox,
HTTPS protocol is enabled. However, to
manage this checkbox you should make sure
the same secured protocol is set up in the
device. Please contact your system
administrator to find out which protocol is
used in your device.
 URL for downloading the application
updates.
 Startup: if enabled, the application will be
run when Windows starts.
Besides Settings item, there are a few item that allow you to display the last synchronization
summary, to create or delete a pairing between your phone and your PC, to open the application
online help, to display information on the application version or to exit the application.