Configuring the phone
Settings
Application Synchronization
PC address
Enter the IP address or the complete network name on which the synchronization application is
installed.
PC port
This data defines the port used on the PC for synchronization. The port must be the same as the
one filled in the PC application.
Warning when exceed
Choose if you wish to be informed when a maximum number of items for synchronization is
reached (the default setting is 500 items but this may have been changed by the administrator -
ask your administrator for the maximum number of contacts).
If you see this warning during synchronization you may lose some of your items because they have
not been synchronized.
Sync. button
Choose to display the synchronization button in the applications bar of your My IC Phone.
Back to homepage.
If you try to start the synchronization before configuring it, you will access the Synchronization
settings.
To Next Page
Loading...
