26
a. Select the other channels that should trigger recording on this channel, then click Apply to save your settings.
b. Click the Arming Schedule tab. In this tab, you can dene up to eight periods for each day. The periods must not
overlap.
c. Click the down arrow in the Mon eld (see above) to setup the schedule for a dierent day, and/or click Copy to copy the
Arming Schedule you setup in the window to other days of the week.
d. Click Apply to save the settings.
e. Click the Action tab. In the Handling tab, you can cause certain actions to occur when motion triggered recording occurs.
SECTION 2: INSTALLING THE SYSTEM
To Next Page