Need help?Do you have a question about the Alicat MC Series and is the answer not in the manual?
Initial setup procedures for the flow controller.
Visual guide to the controller's menu structure and navigation paths.
Steps to set up the controller for serial communication via COMM SETUP menu.
General| Model | MC Series |
|---|---|
| Type | Mass Flow Controller |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Communication Protocols | RS-232, RS-485, Modbus, Analog |
| Display | LCD |
| Materials | 316L stainless steel, Viton |
| Flow Range | 0-0.5 SCCM to 0-5000 SLPM (depending on model) |
| Operating Pressure | Up to 150 psig (varies by model) |
To Next Page