17
• Recharging procedure
1
Plug the AC power cord into the AC power
socket on the battery charger.
2
Insert the battery pack being recharged, along
the guides provided on both sides of the battery
charger. The lamp will be illuminated in red, and
quick recharge will be started.
3
When the quick recharge is completed, the lamp
changes its color to green, indicating that
supplemental recharge (*) has started.
4
About four hours after the quick recharge has
started, the lamp starts blinking in green,
indicating that the supplemental recharge has
been completed.
Note: The supplemental recharge means recharging the battery pack with a small
electric current to prevent its capacity from decreasing due to the self-
discharge. This does not overcharge the battery pack.
• Battery pack vs. recharging time
The battery packs applicable to each battery charger model and their
recharging time are shown below: